Previous image
Sanderson CRSLS1 Classis Style Roadster Header for Chevy LS1, LS2, LS4
Next image
Zoom image

Sanderson CRSLS1 Classic Style Roadster Header GM LS-Series Engines

  • SKU

Not rated yet

Sanderson CRSLS1 classic style outside chassis Roadster header set for GM LS1, LS2, LS3, LS4, LS6, and LS7 engines. Comes with 26" mufflered side pipes.

  • $892.00
Add a different product to compare
  • SKU

Sanderson's  patented flange design requires no gasketsThe Sanderson CRSLS1 is a classic-style outside chassis header for applications using modern GM LS-series engines. A clean swept back look will highlight the lines of your vehicle. Furnished with 26" mufflered turnouts that slip over the header collectors. Other optional turnout lengths available.

Comes with all hardware necessary for installation.

NOTE: Under chassis adapters sold separately


Engine : Chevy LS1, LS2, LS3, LS4, LS6, LS7
Primary Tube Diameter : 1-5/8"
Collector Diameter : 3½"
Weight : 48 Lbs / 21.8 Kg


  • 16-Gauge Primary and Collector Tube Thickness
  • 3/8" Thick Flange
  • Patented Flange Design Requires NO Gaskets
  • Tightest Fitting Header Available Anywhere!
  • Made in the USA


  • Header Bolt Set
  • 26" Sidepipe Turnouts w/Mufflers


Sanderson's Ceramic Coating is recommended for every vehicle application and is the default finish selection choice above. To meet high standards of quality, Sanderson applies a multi-layer inside and outside aluminized ceramic coating in-house and then polishes the coating to a high luster. This aerospace and military-grade technology adds excellent protection to your headers, while offering the benefit of thermal control in your engine bay. It also improves cylinder scavenging of exhaust gases, and increases the longevity of your header investment.

Product questions

No questions yet. Be the first to ask the question!
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment


When sitting in driver's seat and engine in front of you, the LEFT header would be the Driver's Side on LH drive vehicles; coincidently, means the RIGHT header is on the passenger side. See the detail image above left that describes engine sides.

   NOTE: Image graphic is generic and not exact representation of product.

Tube Size 1-5/8" 
Collector Size 3½" 
DIM A 11½" 11½"
DIM B 13" 13"
DIM C 31½" 31½"
Weight (Lbs / Kg) 48 / 21.8 
Sanderson Roadster Header Dimension Graphic

Vehicle Applications:

  • T-Bucket Applications
  • 1927-1929 Cars and Trucks

Engine Applications:

  • GM LS1 5.7L
  • GM LS2 6.0L
  • GM LS3 6.2L
  • GM LS4 5.3L
  • GM LS6 5.7L
  • GM LS7 7.0L



  1. The Patented Leak-Free Design that Sanderson Headers offer you is the only leak-free flange design on the market ... Do Not Attempt To Use Flange Gaskets! The raised flange on the Sanderson Headers will buckle the gasket during tightening and actually cause a leak!
  2. Sanderson Headers are NOT emissions legal on pollution-controlled motor vehicles. It is the purchaser's responsibility to verify local regulations for compliance.
  3. Wrapping your Sanderson Headers with ANY thermal tape voids your header warranty. The best thermal protection for your headers is our Aluminized Ceramic Coating that is available for every Sanderson Header.

Limited 5 Year General Warranty

Sanderson Street Rod Headers strives to supply our customers with the highest quality parts and service available in the street rod industry. In keeping with this, we warrant and will repair or replace, at our option after inspection in our facility, any of our products which are found by us to have failed due to defects in either material or workmanship.  This warranty is activated by the return of the Warranty Card enclosed with every pair of headers, and is effective for FIVE YEARS * from the date of purchase as indicated on the original invoice.

This Warranty does not cover products that fail due to improper motor tuning, alteration, disassembly, or damage caused by racing, misuse, neglect, abuse, improper installation and/or accident, or when used on applications for which they were not designed or approved. We are specifically not responsible for the costs of removal, installation, transportation, destruction of other components, inconvenience, loss of time, or other personal damages, or for any other associated costs including the application of aftermarket coatings applied by others. Sanderson Street Rod headers shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product(s) as found on the original invoice.



* Extremely compact header designs which locate the collector in close proximity to the exhaust ports are very sensitive to engine tuning. Improper air/fuel mix or timing of ignition and/or valvetrain can cause early failure due to excessive heat. For this reason, part numbers CC2 and CC3 are offered with a two-year Warranty period only. All other Warranty conditions apply.

Sanderson 5-Yr Header Warranty


Downloadable Version


Related products
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart The product is unavailable in the catalog
    • SKU
    • $9.99

    Not rated yet
    Add a different product to compare
  • Choose the product options first The product is unavailable in the catalog
    • SKU
    • $199.00

    Not rated yet
    Add a different product to compare
  • Drag and drop me to the cart The product is unavailable in the catalog
    • SKU
    • $68.00

    Not rated yet
    Add a different product to compare