Previous image
Sanderson CC10AP Angle Plug Small Block Chevy Header Set
Next image
Zoom image

Sanderson CC10AP Angle Plug Small Block Chevy Header Set

  • SKU
    SDH-CC10AP-SEC

Not rated yet

The Sanderson CC10AP fits small block Chevy engines using GM-spec angle plug cylinder heads in 1964-up Chevelle, El Camino, and truck applications.

  • $490.00
Qty:  
Add a different product to compare
  • SKU
    SDH-CC10AP-SEC

Sanderson's patented flange design requires no gaskets

The Sanderson CC10AP is a swept back header with the collectors exiting along the angle of the firewall that fits 1964 and Up Chevelle, Malibu, El Camino, and GM truck applications using the small block Chevy engine. This header is for GM-spec angle plug cylinder heads. Use #CC10 for straight plug heads.

NOTE: Designed for GM-spec angle plug cylinder heads and is not compatible with all aftermarket angle plug heads which may utilize a slight variation in plug location or angle.

Comes with all hardware necessary for installation.

SPECIFICATIONS:

Engine : Small Block Chevy 265-400
Primary Tube Diameter : 1½"
Collector Diameter : 2½"
Weight : 17 LBS / 7.71 KGS

FEATURES:

  • 16-Gauge Primary and Collector Tube Thickness
  • 3/8" Thick Flange
  • Patented Flange Design Requires NO Gaskets
  • Tightest Fitting Header Available Anywhere!
  • Made in the USA

INCLUDES:

  • Header Bolt Set
  • Collector Reducer Set

OPTIONS:

Sanderson's Ceramic Coating is recommended for every vehicle application and is the default finish selection choice above. To meet high standards of quality, Sanderson applies a multi-layer inside and outside aluminized ceramic coating in-house and then polishes the coating to a high luster. This aerospace and military-grade technology adds excellent protection to your headers, while offering the benefit of thermal control in your engine bay. It also improves cylinder scavenging of exhaust gases, and increases the longevity of your header investment.

Product questions

  • Tim Wilmoth
    Sep 21, 2018, 08:36 AM

    Will these fit my 1964 impala with vortec heads.

    Administrator
    Sep 21, 2018, 12:11 PM

    No. The '64 Impala uses the GM X-frame and cannot use a rear exit collector. The correct header is one of the Sanderson CC1-series headers (CC1, CC158, CC134, CC1AP, etc.). If this is a straight plug Vortec cylinder head, be sure to specify Vortec when ordering. If this is an angle plug cylinder head, the CC1AP is the correct header set.

  • Andreas Gidluns
    Jun 17, 2018, 07:54 AM

    Hello i am looking for headers fpr my Chevelle 66
    I was looking at these
    https://www.centuryperformance.com/sanderson-cc10ap-angle-plug-small-block-chevy-header-set.html

    But will they fit my afr heads? On my heads on the sides it says 190R
    I am not sure what headers to go with?
    Please help

    Thanks / Andreas

    Administrator
    Jun 17, 2018, 01:45 PM

    Yes, the Sanderson CC10AP fits your Chevelle and the AFR heads.

Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment

Limited 5 Year General Warranty

Sanderson Street Rod Headers strives to supply our customers with the highest quality parts and service available in the street rod industry. In keeping with this, we warrant and will repair or replace, at our option after inspection in our facility, any of our products which are found by us to have failed due to defects in either material or workmanship.  This warranty is activated by the return of the Warranty Card enclosed with every pair of headers, and is effective for FIVE YEARS * from the date of purchase as indicated on the original invoice.

This Warranty does not cover products that fail due to improper motor tuning, alteration, disassembly, or damage caused by racing, misuse, neglect, abuse, improper installation and/or accident, or when used on applications for which they were not designed or approved. We are specifically not responsible for the costs of removal, installation, transportation, destruction of other components, inconvenience, loss of time, or other personal damages, or for any other associated costs including the application of aftermarket coatings applied by others. Sanderson Street Rod headers shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product(s) as found on the original invoice.

WRAPPING HEADERS WITH THERMAL TAPE VOIDS WARRANTY.

 

* Extremely compact header designs which locate the collector in close proximity to the exhaust ports are very sensitive to engine tuning. Improper air/fuel mix or timing of ignition and/or valvetrain can cause early failure due to excessive heat. For this reason, part numbers CC2 and CC3 are offered with a two-year Warranty period only. All other Warranty conditions apply.

Sanderson 5-Yr Header Warranty

 

Downloadable Version

 

NOTE: VORTEC Cylinder Heads

Vortec style (and this includes non-GM aftermarket) cylinder heads use a different spark plug spacing on the center two spark plugs. Many exhaust headers will require specific dimpling to ensure adequate spark plug clearance when used with the Vortec-style heads.

If unsure, please measure the center-to-center distance between the center pair of spark plugs on your heads. The standard distance is 4.5" (11.43 cm) versus 4.0" (10.16 cm) on the Vortec heads.See image below:

Vortec-style cylinder head - Plug Spacing

We often see confusion in what a customer deems a D-Port cylinder head. The problem originates in the technical understanding of what constitutes a D-PORT versus a D-shape. The D-Port roof extends well above the centerline of the exhaust port, whereas the D-shaped port fits nicely inside what is deemed a standard port dimension.

Small Block Chevy Exhaust Port Shapes

 

For angle plug cylinder heads only. Order part number CC10 for straight plug cylinder heads.

Spark Plugs:

Use of shorter "header plugs" may be necessary for some cylinder heads.

GENERAL NOTES:

  1. The Patented Leak-Free Design that Sanderson Headers offer you is the only leak-free flange design on the market ... Do Not Attempt To Use Flange Gaskets! The raised flange on the Sanderson Headers will buckle the gasket during tightening and actually cause a leak!
  2. Sanderson Headers are NOT emissions legal on pollution-controlled motor vehicles. It is the purchaser's responsibility to verify local regulations for compliance.
  3. Wrapping your Sanderson Headers with ANY thermal tape voids your header warranty. The best thermal protection for your headers is our Aluminized Ceramic Coating that is available for every Sanderson Header.

Vehicle Applications

Steering

Transmission

1964-1972 Chevrolet Chevelle & Malibu Stock Automatic
1964-1972 Chevrolet El Camino Stock Automatic
1970-1972 GMC Sprint Stock Automatic
1960-1987 Chevrolet / GMC Pickups Stock Manual / Automatic
1965-1970 Chevrolet Impala (floor shift automatic ONLY) Stock Automatic
     
"Other" Similar GM Chassis (if using small block Chevy engine) Stock Automatic
Applications using Chevelle front clip frame grafts Stock Automatic

Engine Applications:

  • Chevrolet Small Block 265-400 V8 Engines
  • (Fits angle plug cylinder head applications)

DIMENSIONS:

When sitting in driver's seat and engine in front of you, the LEFT header would be the Driver's Side on LH drive vehicles; coincidently, means the RIGHT header is on the passenger side. See the detail image above left that describes engine sides.

 NOTE: Image graphic is generic and not exact representation of product. 

Tube Size 1½" 
Collector Size 2½" 
  LEFT RIGHT
DIM A 3¾" 3¾"
DIM B 8½" 8½"
DIM C 24" 24"
Weight (Lbs / Kg) 17 / 7.71
Sanderson Header Dimension Graphic
Related products
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart The product is unavailable in the catalog
    • SKU
      PTX-82180
    • $9.99

    Not rated yet
    Add a different product to compare
  • Choose the product options first The product is unavailable in the catalog
    • SKU
      SDH-CopperGaskets2.5
    • $30.00

    Not rated yet
    Add a different product to compare
  • Drag and drop me to the cart The product is unavailable in the catalog
    • SKU
      SDH-CollectorBoltSet
    • $18.00

    Not rated yet
    Add a different product to compare
  • Choose the product options first The product is unavailable in the catalog
    • SKU
      SDH-CC10-SEC
    • $490.00

    Not rated yet
    Add a different product to compare
  • Choose the product options first The product is unavailable in the catalog
    • SKU
      SDH-CC10_158-SEC
    • $535.00

    Not rated yet
    Add a different product to compare
  • Choose the product options first The product is unavailable in the catalog
    • SKU
      SDH-CC10AP-158-SEC
    • $535.00

    Not rated yet
    Add a different product to compare
Customers who bought this product also bought
  • Drag and drop me to the cart The product is unavailable in the catalog
    • SKU
      MFY-70-94014
    • NEW PRODUCT
    • $35.45

    Not rated yet
    Add a different product to compare
Customers who viewed this product bought
  • Choose the product options first The product is unavailable in the catalog
    • SKU
      SDH-CC10_158-SEC
    • $535.00

    Not rated yet
    Add a different product to compare
  • Choose the product options first The product is unavailable in the catalog
    • SKU
      SDH-CS11AP134-SEC
    • $629.00

    Not rated yet
    Add a different product to compare
  • Choose the product options first The product is unavailable in the catalog
    • SKU
      SDH-CC17AP-SEC
    • $519.00

    Not rated yet
    Add a different product to compare
  • Drag and drop me to the cart The product is unavailable in the catalog
    • SKU
      MFY-70-94014
    • NEW PRODUCT
    • $35.45

    Not rated yet
    Add a different product to compare