Previous image
Sanderson BB1 Big Block Chevy Blockhugger Header Set
Next image
Zoom image

Sanderson BB1MV Big Block Chevy Header Set

  • SKU
    SDH-BB1MV-SEC

Not rated yet

The Sanderson BB1MV header fits 1932-48 Cars and Trucks, 1949-63 Chevy cars, 1948-Up Ford pickup, and other applications using the big block Chevrolet 502 Mark V engine. (See Application Tab)

  • $574.00
Qty:  
Add a different product to compare
  • SKU
    SDH-BB1MV-SEC

Sanderson's patented flange design requires no gaskets

The Sanderson BB1MV header fits big block Chevrolet engines in cars, trucks, and street rods where tight fit and performance are a factor. Virtually eliminating ground clearance problems, the BB1MV hangs down less than 11" from the center of the exhaust ports on the cylinder heads. The BB1MV header is 2" tighter to the block than any other blockhugger header!

The BB1MV will fit most chassis without a crossmember beneath the center of the engine block.

NOTE: The BB1MV is designed specifically for the RH-dipstick on the MarkV 502 engine The difference between the more common BB1 and this header set is the tube routing on the right side header differs slightly to accomodate the disptick location.

Comes with all hardware necessary for installation.

SPECIFICATIONS:

Engine : Big Block Chevy 502 (Mark IV)
Primary Tube Diameter : 1-7/8"
Collector Diameter : 3"
Weight : 17 LBS / 7.71 KGS

FEATURES:

  • 16-Gauge Primary and Collector Tube Thickness
  • 3/8" Thick Flange
  • Patented Flange Design Requires NO Gaskets
  • Tightest Fitting Header Available Anywhere!
  • Made in the USA


INCLUDES:

  • Header Bolt Set
  • Collector Reducer Set

OPTIONS:

Sanderson's Ceramic Coating is recommended for every vehicle application and is the default finish selection choice above. To meet high standards of quality, Sanderson applies a multi-layer inside and outside aluminized ceramic coating in-house and then polishes the coating to a high luster. This aerospace and military-grade technology adds excellent protection to your headers, while offering the benefit of thermal control in your engine bay. It also improves cylinder scavenging of exhaust gases, and increases the longevity of your header investment.

Product questions

No questions yet. Be the first to ask the question!
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment

DIMENSIONS:

When sitting in driver's seat and engine in front of you, the LEFT header would be the Driver's Side on LH drive vehicles; coincidently, means the RIGHT header is on the passenger side. See the detail image above left that describes engine sides.

  NOTE: Image graphic is generic and not exact representation of product.

Tube Size 1-7/8" 
Collector Size 3" 
  LEFT RIGHT
DIM A 3½" 3¼"
DIM B 10¾"     10"    
DIM C ---- ----
Weight (Lbs / Kg) 17 / 7.71 
Sanderson Header Dimension Graphic

Vehicle Applications:

Steering Type

Pre-1930 Chevy pickup CS
1930-1940 street rods, cars, and trucks CS, RP
1946-1948 cars and trucks CS
1955-1957 Chevy Bel Air Stock, 605, 500
1958-1964 Chevy full size cars (Caprice, Impala, etc.) Stock
1948-1952 Ford pickup Stock
1949-1954 Chevy pickup Stock
1953-Up Ford pickup Stock

CS = cross steering; RP = rack and pinion

Engine Applications:

Chevrolet Mark V, 502 big block engines

 

 

GENERAL NOTES:

  1. The Patented Leak-Free Design that Sanderson Headers offer you is the only leak-free flange design on the market ... Do Not Attempt To Use Flange Gaskets! The raised flange on the Sanderson Headers will buckle the gasket during tightening and actually cause a leak!
  2. Sanderson Headers are NOT emissions legal on pollution-controlled motor vehicles. It is the purchaser's responsibility to verify local regulations for compliance.
  3. Wrapping your Sanderson Headers with ANY thermal tape voids your header warranty. The best thermal protection for your headers is the Aluminized Ceramic Coating available for every Sanderson Header.

Limited 5 Year General Warranty

Sanderson Street Rod Headers strives to supply our customers with the highest quality parts and service available in the street rod industry. In keeping with this, we warrant and will repair or replace, at our option after inspection in our facility, any of our products which are found by us to have failed due to defects in either material or workmanship.  This warranty is activated by the return of the Warranty Card enclosed with every pair of headers, and is effective for FIVE YEARS * from the date of purchase as indicated on the original invoice.

This Warranty does not cover products that fail due to improper motor tuning, alteration, disassembly, or damage caused by racing, misuse, neglect, abuse, improper installation and/or accident, or when used on applications for which they were not designed or approved. We are specifically not responsible for the costs of removal, installation, transportation, destruction of other components, inconvenience, loss of time, or other personal damages, or for any other associated costs including the application of aftermarket coatings applied by others. Sanderson Street Rod headers shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product(s) as found on the original invoice.

WRAPPING HEADERS WITH THERMAL TAPE VOIDS WARRANTY.

 

* Extremely compact header designs which locate the collector in close proximity to the exhaust ports are very sensitive to engine tuning. Improper air/fuel mix or timing of ignition and/or valvetrain can cause early failure due to excessive heat. For this reason, part numbers CC2 and CC3 are offered with a two-year Warranty period only. All other Warranty conditions apply.

Sanderson 5-Yr Header Warranty

 

Downloadable Version

 

Related products
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart The product is unavailable in the catalog
    • SKU
      PTX-82180
    • $9.99

    Not rated yet
    Add a different product to compare
  • Choose the product options first The product is unavailable in the catalog
    • SKU
      SDH-CopperGaskets2.5
    • $30.00

    Not rated yet
    Add a different product to compare
  • Drag and drop me to the cart The product is unavailable in the catalog
    • SKU
      SDH-CollectorBoltSet
    • $18.00

    Not rated yet
    Add a different product to compare