Starting with the Geddex™ Dial-In™ product, if you have ever drag raced in bracket classes you know the problems with using shoe polish to write and edit your entry number and E.T. on your windows. Sure, shoe polish goes on easy enough, but try changing your E.T. markings between rounds. You need a strong cloth towel, water, probably a razor blade, and you will still have a mess to deal with.

 

When you need to change your posted E.T. you want it quick, clean, and clear. You don't want to feel like your prepping some old wood table for a new coat of stain. It may have happened to you, or you may have seen it happen to another racer when the Official Starter has to walk over to you while you're performing your burnout and staging your car. All your thoughts focused on the upcoming run when you're interrupted because the track staff in the tower cannot read the hieroglyphics of an E.T. you doodled on your car. Now your focus is gone, and you're rushed to clear your head so you can cut a good light.

 

With Geddex™ Dial-In™ , you have the ease of shoe polish with good coverage, but you also have simple editing/clean up. Dial-In™  wipes right off without a bucket full of tools. Use a basic dry towel and your markings are gone, presenting a clean slate for new numbers to be applied. Plus, Dial-In™ will not harm your paint, is safe on Lexan, and is inexpensive. 

 

For Pricing and Ordering Dial-In, click here

 

The Geddex™ Burnout Guard™ product is another product for anyone who races a vehicle where tire rubber is flying off and sticking to your body panels or inner fender wells. Burnout Guard™ makes tire rubber rinse off with just water. Water burnouts on your drag car help your traction and consistency, but look at all the rubber splattered across your vehicle's quarter panels and inner fenderwells. Save yourself grief and paint damage by spraying Geddex™ Burnout Guard™ on the body sections that receive the rubber splatter before your next race. It Burnout Guard™ dries clear and will not harn your paint. You now have a water-soluble layer of protection. After the race, simply hose off the splattered area with water and wipe away the rubber. Repeat at each race for continued protection.

 

 

 

 

 

 

 

 

 

Geddex™ Wheels Up!™ is specific for racers with wheelie bars as a chassis tuning tool. Geddex™ has developed a formula that leaves a bright solid mark on the track to help tune your chassis to perfection.

 

Wheels Up!™ transfers to the track surface easily, taking the guesswork out of chassis adjustment. The special applicator assures the correct amount of product is applied to each wheel.

 

As racers we know that final air pressure adjustment is critical to our race car's performance and consistency. With Slick Air™ you can easily put air in your tires (even in the staging lanes) and be ready to make your next pass.

 

Slick Air™ is light and convenient enough to be carried in the car, and priced to where everyone should keep a few cans available for a variety of uses. Good for at the track, in the home, the trailer, the daily-driver, and more. The number of uses per can depends upon the tire size.