  Air Lift® Air Compressor System Descriptions Read down this page for information on the various Air Lift On Board Air Systems that are available. What style compressor kit you need depends mostly upon your vehicle, and secondly upon the type of kit, or kits you are using on the vehicle. On this page you will find information on the Air Lift Load Controller II, SmartAir, and SureSet systems.
For maximum convenience and leveling, Air Lift offers on board air systems to work with your Air Lift Air Springs. How to select the correct system can seem a bit confusing, so we at Century Performance Center have created this page to assist you in making the correct decision and purchase. Below the basic compressor descriptions you will see two charts. While one person will search products by features, another may search by the intended application, so included both charts. There are systems that offer manual adjustment, and also fully automatic systems. The first chart is based upon application, showing you the types of use for each on board air system kit. The second chart (click on it to enlarge) shows the selection of features that each system offers.
|
 Load Controller ll - Single Gauge, part #25592
Economically priced for less demanding applications, the Load Controller ll is Air Lift's most popular accessory for trucks, vans, and SUVs. Individual control of rear springs allow you to level the vehicle from side-to-side or front-to-rear. Comes with Air Lift's new Wiring Harness, making installation easier and faster - no need to route air and electrical lines separately. Ready air supply - no need to hunt for a service station. Level the vehicle with the flick of a finger.
Includes Air Lift's Low Pressure Sensor (LPS), which automatically activates the compressor when pressure is below a minimum safe pressure. This will eliminate the largest cause of air spring failure - low air pressure.
|
|
 Load Controller ll - Dual Gauge, part #25812
Economically priced for less demanding applications. Air Lift's most popular accessory for pickups and vans. Individual control of rear springs allow you to level the vehicle from side-to-side and front-to-rear. Comes with Air Lift's new Wiring Harness, making installation easier and faster - no need to route air and electrical lines separately. Ready air supply - no need to hunt for a service station. Level the vehicle with the flick of a finger.
Includes Air Lift's Low Pressure Sensor (LPS), which automatically activates the compressor when pressure is below a minimum safe pressure. This will eliminate the largest cause of air spring failure - low air pressure.
|
|
SmartAir -
- Single Leveling Sensor, part #25415 (front to rear leveling)
- Dual Leveling Sensor, part #25430 (front to rear and side to side leveling)
The Air Lift SmartAir system takes user interaction away, making your air spring ride height adjustments automatic. Old fashioned automatic leveling systems used a mechanical lever and sensor between the frame and axle to determine level and ride height. The levers were difficult to mount and calibrate, and prone to failure. Air Lift has solved this problem with the SmartAir System; an exclusive electronic system that does not require a contact arm. This system is quick and easy to install, and no air lines are mounted in the passenger compartment.
The SmartAir system senses when the vehicle is not level, either too high or too low, and automatically returns to the desired set ride height. Works under any road or load condition.
|
Air Lift Compressor Kits By Use/Application:
|
